Search Results

Standard

GLAND DESIGN, ELASTOMERIC O-RING SEALS, STATIC RADIAL

1973-04-01

HISTORICAL

ARP1232

This document establishes standard gland dimensions for static radial O-ring seal applications and provides recommendations for modifying these glands in special applications. No provisions are made in this document for anti-extrusion devices. SI unit conversions for U.S. customary units have been provided for reference purposes.

Standard

Gland Design, Elastomeric O-Ring Seals, Static Radial

2012-10-19

HISTORICAL

ARP1232B

This document establishes standard gland dimensions for static radial O-ring seal applications and provides recommendations for modifying these glands in special applications. No provisions are made in this document for anti-extrusion devices. SI unit conversions for U.S. customary units have been provided for reference purposes.

Standard

GLAND DESIGN, ELASTOMERIC O-RING SEALS, DYNAMIC RADIAL, 1500 PSI MAX

1995-05-01

HISTORICAL

ARP1233

This document establishes standard gland design criteria and dimensions for dynamic radial O-ring seal applications and provides recommendations for modifying these glands in special applications. There are no provisions in this document for anti-extrusion devices.

Standard

Gland Design Criteria and Dimensions for Dynamic Radial O-Ring Seal Applications Specifically for Engine and Engine Control Systems Operating at 1500 psi Max

2021-04-14

CURRENT

ARP1233B

This document recommends standard gland design criteria and dimensions for dynamic radial O-ring seal applications specifically for engine and engine control systems operating at pressures up to a maximum of 1500 psi (10342.14 kPa) and provides recommendations for modifying these glands in special applications. There are no provisions in this document for anti-extrusion devices. NOTE: The criteria set forth here are similar to but not identical with those in MIL-G-5514 and AS4716. This document is not intended to replace MIL-G-5514 or AS4716 for hydraulic applications.

Standard

Gland Design, Elastomeric O-Ring Seals, Dynamic Radial, 1500 psi Max

2012-11-01

HISTORICAL

ARP1233A

This document establishes standard gland design criteria and dimensions for dynamic radial O-ring seal applications and provides recommendations for modifying these glands in special applications. There are no provisions in this document for anti-extrusion devices.

Standard

GASKET, RUBBER, FLUID RESISTANT, OILS, SYNTHETIC OILS AND FUELS (-65 TO +400 °F), MOLD IN GROOVE

2008-02-19

HISTORICAL

AS27196A

Standard

SEAL, BONDED, 302 CORROSION RESISTANT STEEL, AMS5516, MOLD IN GROOVE, FLUOROCARBON RUBBER, AMS7276

2014-06-13

HISTORICAL

AS27196B

Standard

SEAL, BONDED, 302 CORROSION RESISTANT STEEL, AMS5516, MOLD IN GROVE, FLUOROCARBON RUBBER, AMS7276

2019-09-03

CURRENT

AS27196C

Standard

Retainers, (Backup Rings), Hydraulic and Pneumatic, Polytetrafluoroethylene Resin, Solid, Un-Cut, for Use in Static Glands to AS5857

2023-07-03

CURRENT

AS5861C

This SAE Aerospace Standard (AS) specifies solid polytetrafluoroethylene (PTFE) retainers (backup rings) for use in static glands in accordance with AS5857. They are usually for use in hydraulic and pneumatic systems as anti-extrusion devices in conjunction with O-rings and other seals.

Standard

Retainers, (Backup Rings), Hydraulic and Pneumatic, Polytetrafluoroethylene Resin, Solid, Un-Cut, for Use in Static Glands to AS5857

2020-11-19

HISTORICAL

AS5861B

This SAE Aerospace Standard (AS) specifies solid polytetrafluoroethylene (PTFE) retainers (backup rings) for use in static glands in accordance with AS5857. They are usually for use in hydraulic and pneumatic systems as anti-extrusion devices in conjunction with O-rings and other seals. NOTE: This specification includes material tests but does not include hydraulic or pneumatic performance tests.

Standard

O-RING MOLDED FROM AMS7379 FLUOROCARBON (FKM) MATERIAL

2023-06-06

CURRENT

AS5729B

THIS STANDARD ESTABLISHES THE DIMENSIONAL AND VISUAL QUALITY REQUIREMENTS, LOT REQUIREMENTS AND PACKAGING AND LABELING REQUIREMENTS FOR O-RINGS MOLDED FROM AMS7379 FLUOROCARBON (FKM) RUBBER. IT SHALL BE USED FOR PROCUREMENT PURPOSES.

Standard

SEAL, PLAIN, RUBBER (HOT AIR RESISTANT 400 °F) MOLD IN GROOVE

2008-02-19

HISTORICAL

AS27197A

Standard

SEAL, BONDED, 302 CORROSION RESISTANT STEEL, AMS5516, MOLD IN GROOVE, SILICONE RUBBER, AMS7268

2019-09-03

CURRENT

AS27197C

Standard

SEAL, BONDED, 302 CORROSION RESISTANT STEEL, AMS5516, MOLD IN GROOVE, SILICONE RUBBER, AMS7268

2014-07-07

HISTORICAL

AS27197B

Standard

Polymeric Bearings for Linear Actuators

2023-06-20

CURRENT

ARP7204

This SAE Aerospace Recommended Practice (ARP) provides guidelines for the application of polymeric bearings for linear actuation systems. Design considerations are included for recommended fit and function in conjunction with material selection and load-bearing capability.

Standard

Elastomer Compatibility Considerations Relative to Elastomer Selection

2021-10-01

CURRENT

AIR786C

This SAE Aerospace Information Report (AIR) contains data relative to the chemical nature of aerospace fluids and relates each to its empirical effect upon elastomeric components. Since the compatibilities of elastomers are determined by the compounding as well as the nature of the base polymer, the elastomers considered are limited to finished compounds for which material or performance specifications can be referenced.

Standard

O-Ring Groove Design For Packing Preformed, Elastomeric O-Ring Seals, Static, Radial Squeeze, Metric

2012-12-10

HISTORICAL

MAP3440

This recommended practice provides the design criteria for static elastomeric O-ring seal applications, radial squeeze groove dimensions for aerospace metric O-ring seal sizes as specified in MA2010. The conditions considered to formulate the design criteria are also described, e.g., seal stretch, cross-section reduction, squeeze, and swell.

Standard

Retainers (Backup Rings), Hydraulic and Pneumatic, Polytetrafluoroethylene Resin, Single Turn, Scarf-Cut, For Use in AS5857 Static Glands

2020-11-09

CURRENT

AS5860C

This SAE Aerospace Standard (AS) specifies scarf-cut polytetrafluoroethylene (PTFE) retainers (backup rings) for use in static glands in accordance with AS5857. They are usually for use in hydraulic and pneumatic systems as anti-extrusion devices in conjunction with O-rings and other seals.

Standard

Recommendations for Installation of Seals in Standard Glands

2016-02-16

CURRENT

ARP5555

This SAE Aerospace Recommended Practice (ARP) contains guidance regarding hardware design and installation procedures for seals in hydraulic components that utilize standard seal glands in accordance with AS4716, AS4832, AS4088, AS4052, AS5857, and AS6235.

Standard

Recommendations for Hardware Design and Installation of Seals in Standard Glands

2022-04-20

WIP

ARP5555A

This SAE Aerospace Recommended Practice (ARP) contains guidance regarding hardware design and installation procedures for seals in hydraulic components that utilize standard seal glands in accordance with AS4716, AS4832, AS4088, AS4052, AS5857, and AS6235.